Our Roofing Services | Spring Hill, KS
Spring Hill Roofing & Maintenance handles every roofing job from a single-shingle repair to a full commercial re-roof. Here's what we do in Spring Hill.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →Roof Repair
Emergency roof repairs in Spring Hill within 24 hours for active leaks. We tarp the area to stop immediate water entry, then schedule the permanent fix. Weekend and holiday emergency service available. Call (877) 349-1553.
Get a Free Quote →Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →New Roof Installation
New construction roofing in Spring Hill starts with getting the design details right before materials arrive. Roof pitch, attic ventilation needs, snow load requirements, and local code amendments all affect material selection and installation methods. We coordinate with your general contractor or architect to ensure the roof system matches the building specifications.
Get a Free Quote →Metal Roofing
Metal roofing reflects solar heat instead of absorbing it. In Kansas, that means 15-25% lower cooling costs compared to dark asphalt shingles. The higher upfront cost pays for itself over the life of the roof. And the life of a metal roof is twice or three times longer than shingles.
Get a Free Quote →Shingle Roofing
GAF Timberline HDZ. The best-selling shingle in North America. With StrikeZone nailing area for consistent fastener placement. Class A fire rating per UL 790, Class 4 impact resistance per UL 2218 (when installed in the GAF Roof System), and Class H wind rating per ASTM D7158 (130 mph). We install Timberline in the full GAF system to qualify for Golden Pledge warranty: 25-year non-prorated workmanship plus 50-year materials with WindProven limited wind warranty (no max speed). That warranty is why we recommend GAF for most Spring Hill homes.
Get a Free Quote →Flat Roofing
Modified bitumen is the best choice for residential flat roofs and low-traffic commercial applications in Spring Hill. We torch-apply SBS-modified base and cap sheets in a two-ply system. Granulated cap sheet handles foot traffic and UV exposure. 15-20 year warranty.
Get a Free Quote →Commercial Roofing
We install Carlisle SynTec and Firestone TPO membrane systems in 60-mil and 80-mil thickness over minimum R-25 polyiso insulation (more in climate zones requiring it). Seams hot-air welded at 900°F+ and tested with a seam probe. Fully adhered systems for wind uplift zones per FM I-90 or I-120. Mechanically attached for re-roofs over existing insulation. NRCA member, trained per manufacturer specifications.
Get a Free Quote →Gutter Installation
We install gutter guards for homeowners who are done cleaning gutters twice a year. Micro-mesh over the opening, screwed into the front lip. Leaves and pine needles sit on top and blow off. Not 100% maintenance-free, but close. You might hose them once a year.
Get a Free Quote →Roof Inspection
Our inspection covers the roof and the attic. From the attic, we check for daylight through the roof deck, moisture stains on rafters, mold on sheathing, and ventilation function. Problems in the attic often indicate roof issues that aren't visible from the surface.
Get a Free Quote →Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →